Stainless Steel 304 Butt Weld Pipe Fittings
Introduction
Steel Sales Company manufactures Certified & ApprovedIndustrial Pipe Fittings. Pipe Fittings can be produced and provided in Carbon Steel, Stainless Steel, and Nickel Based Alloys. Our pipe fittings are just of the highest caliber and go under quality checks to ensure there are no defects. Our Pipe fittings are fabricated to ensure a tight and watertight fit.
Product ID: SSC908
Brand: Steel Sales Co.
Manufacturer: Steel Sales Company
Model: 1/2″ NB to 48″ NB
Further Reading
SStainless Steel 304 Butt weld Pipe Fittings, SS WP304 Pipe Fittings, SS UNS S30400 Buttweld Fitting, SS 304 Elbow, ANSI B16.9 Stainless Steel 304 Reducer Suppliers.
Stainless Steel ASTM A403 WP304 Fittings, Werkstoff No 1.4301 SS Buttweld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, or MSS SP-79 Stainless Steel 304 Butt weld Pipe Fitting, Manufacturer Of ASTM A403 WP304 Stainless Steel Buttweld Fittings in Mumbai, India.
UNS S30409 Buttweld Long Radius Elbow Supplier, Manufacturer, Exporter in Mumbai, India
Stainless Steel 304 Pipe Fitting, Stainless Steel WP304 Tee, ASME SA403M Stainless Steel WP 304 Stub End, 304 SS Pipe Cap, SS Grade WP304 Pipe Elbow, Stainless Steel 304 Seamless Pipe Fittings Supplier, Traders in India.
Steel Sales Company is a greatest providers, producer, exporter of Stainless Steel Stainless Steel 304 Butt weld Pipe Fittings, WP304 Tee, ASME SA403M Stainless Steel WP 304 Stub End, 304 SS Pipe Cap, SS Grade WP304 Pipe Elbow, Stainless Steel 304 Seamless Pipe Fittings. Tempered Steel 304 Butt weld Pipe Fittings, SS WP304 Pipe Fittings, UNS S30409 Buttweld Long Radius Elbow. These Stainless Steel 304 Tee Pipe Fittings are non – attractive in the strengthened condition however may turn out to be somewhat attractive because of welding. Tempered Steel 304 Stub End Pipe Fittings have amazing erosion opposition in a wide scope of synthetic substances, particularly in acidic chloride conditions, for example, those experienced in mash and paper factories. Expanded degrees of chromium, molybdenum and nickel in these Stainless Steel 304 End Cap, improve protection from chloride pitting and general erosion. Obstruction of Stainless Steel 304 Dish Cap Pipe Fittings increments with molybdenum composite substance, which is further impervious to sulphuric corrosive fixations up to 5 percent at temperatures as high as 49 Degree C. At temperatures under 38 Degree C, these Stainless Steel 304 Long Radius Elbows have magnificent protection from arrangements of higher fixation. Our ASME SA403M SS 304 Reducer is requested profoundly by the printing and material industry because of their adaptability and phenomenal weldability. We are providers and exporters of SS UNS S30400 Equal Tee that are fabricated with strung closures that associate with funnels and cylinders without welding, in this manner cutting expenses. Likewise, We offer a wide scope of hardened steel ASTM A403 WP304 pipe fittings.
Standard Specification For Stainless Steel ASTM A403 WP304 Pipe Fittings
Specifications : ASTM A403 / ASME SA403
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Type : Seamless / Welded / Fabricated
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Pipe Fittngs:
Pipe Fittings are connections used to connect two pipes. The connection provides a firm bound to the pipe which ensures mechanical and structural strength to hold the equipment. It also ensures the free flow of liquid in the process. A pipe fitting is utilized in pipe frameworks to associate straight segments of tube or pipes, adjust to various sizes or shapes, and for different purposes. These fittings are utilized in plumbing to control the movement of water, gas, or fluid waste in local or business situations, inside an arrangement of pipes or tubes.
Applications:
- Oil & Gas
- Pharmaceuticals
- Paper Mills
- Research & Development
- Plumbing
- Food & Sanitary
Grades:
- Carbon Steel Pipe Fittings
- Stainless Steel Pipe Fittings
- Duplex Steel Pipe Fittings
- Super Duplex Steel Pipe Fitting
- Inconel Pipe Fittings
- Hastelloy Pipe Fittings
- Monel Pipe Fittings
- Titanium Pipe Fittings
- SS904L Pipe Fittings
Types:
- Butt Weld Fittings
- Socket Weld Fittings
- Outlets
Buttweld Cap
Long Radius Bend
Buttweld Reducer
Buttweld Tee
Buttweld Stubend
Buttweld U-bend
Buttweld Laterals
Buttweld Nipples
Socketweld Threaded Cap
Socketweld Threaded Coupling
Socketweld Threaded Elbow
Socketweld Threaded Nipple
Socketweld Threaded Plug
Socketweld Threaded Tee
Socketweld Threaded Union
Socket Weld Outlet
Elbolet Outlets
Threading Outlet
Nipple Outlet
Lateral Outlet
Sweep Outlet
Flangeolet Outlet
Thermolet Outlet
Production:
The production procedure can be partitioned independently for various sorts of fittings:
Buttweld fittings :
Buttweld fittings are delivered utilizing pipes as an essential raw material. The fittings are made into the ideal shape and size utilizing different machines and warmth treatment whenever required. Followed by that the finishes are liable to inclining to utilizing CNC Machining. That is trailed by sandblasting for completion of the fitting. The last procedure includes quality testing and stamping.
Socket weld fittings & Olets :
We essentially depend on re-appropriated administrations to manufacture socket weld fittings, because of bunches of dyes promptly accessible with our sub sellers. Notwithstanding, machining happens in the house, trailed by completing and checking for traceability of the base material.
The pipe fittings manufactured by us are organized by male and female connectors such as:
Male threaded: In male threaded, the threads are exterior, they are made to screw into the inside of a larger diameter pipe end, which has internal threading.
Female threaded: In female threaded, the threads are interior, they are made to receive male threaded fittings.
Male slip fit: A male slip fit has no threads, it is made to slip into a slightly larger female sleeve.
Female slip fit: A female slip fit also has no threads, it is made to receive a male slip fit that is slightly narrower.
Quality:
Steel sales Co is certified by all renowned certificates including ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 & CE-PED 97/23/EC. We guarantee the best quality for all the Pipe Fittings manufactured as they are checked in the workshop for defects in quality and technique. Our quality program is a 3 step independent department check for various factors, including Dimensional Check, Visual Inspection, and Finishing, Burr level, Leakage Test, Pressure Rating test, Chemical inspection, and Mechanical properties verification.
Brand:
Pipe fittings manufactured are marked with the standard format of SSC-Size-Material-Heat Number. This heat number is fully detectable to our records and we keep a rigid watch to guarantee the credibility of our image isn't copied by different brands.
Stainless Steel 304 / 316 Weld Neck Flanges Chemical Composition
Standards | ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings |
Size | 1/2″ NB TO 48″ NB |
Designation | A 182 / A 240, SA 182 / SA 240 |
Class | 150#, 300#, 400#, 600#, 900#, 1500# & 2500#. |
Grade | ASTM A182 F304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L ETC. |
ASME SA403 304 Stainless Steel Buttweld Fittings Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
Chemical Composition of Grade Stainless Steel 304 Butt weld Pipe Fittings
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
Mechanical Properties of ASTM A403 SS 304 Buttweld Pipe Fittings
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Packing & Shipping

Marking & Packing Of Stainless Steel 304 Buttweld Pipe Fittings
Steel Sales Pack Stainless Steel 304 Butt weld Pipe Fittings Properly And Carefully To Ensure That There Is No Damage To The Stainless Steel 304 Butt weld Pipe Fittings During The Transit. We Pack Carbon Steel round bars & wires In Wooden Boxes And Supply It All Over The World.
High-Quality Stainless Steel 304 Butt weld Pipe Fittings – Quality Assurance!
Steel Sales Co Is One Of The Most Trusted Exporter, Supplier, Stockist & Manufacturer Of Carbon Steel Flanges. Steel Sales Co Offers High-Quality Carbon Steel Flanges. We Inspect Our Stainless Steel 304 Butt weld Pipe Fittings At Each Stage Of Production Process To Make Sure That The Quality Of The Stainless Steel 304 Butt weld Pipe Fittings Is Not Compromised. They Are Examined To Confirm Their Standards And We Also Offer Third Party Inspection Of Our Stainless Steel 304 Butt weld Pipe Fittings On Demand Of Our Clients. Steel Sales Co even Offer Test Certificates For Our Carbon Steel round bars & wires.
Material Testing:
We at Steel Sales Co. ensure that all our materials go through strict quality tests before dispatching them to our clients.
- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Chemical Analysis – Spectro Analysis
- Positive Material Identification – PMI
- Testing
- Flattening Test
- Micro and MacroTest
- Pitting Resistance Test
- Flaring Test
- Intergranular Corrosion (IGC) Test
Documentation
- Commercial Invoice which includes HS Code
- Packing List including net weight and gross weight, number of boxes, Marks and Numbers
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- Fumigation Certificates
- Raw Material Test Reports
- Material Traceability Records
- Quality Assurance Plan (QAP)
- Heat Treatment Charts
- Test Certificates certifying NACE MR0103, NACE MR0175
- Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
Guarantee Letter - NABL approved Laboratory Test Reports
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
- Form A for the purposes of the Generalized System of Preferences (GSP)
Our Products
5 Reasons to use Duplex Steel Flanges
Duplex From Special Piping Materials Duplex treated steel is an exceptionally valuable metal that is utilized the world over. It gets its name from the way that it comprises two distinct evaluations of metal. Basically, Duplex is a Fe-Ni-Cr compound that has a...
Get In Touch
Related Products
- Stainless Steel Instrumentation Ferrule Fittings
- Carbon Steel Instrumentation Ferrule Fittings
- Duplex Steel Instrumentation Ferrule Fittings
- Super Duplex Steel Instrumentation Ferrule Fittings
- Hastelloy Instrumentation Ferrule Fittings
- Inconel Instrumentation Ferrule Fittings
- Monel Instrumentation Ferrule Fittings
- Titanium Instrumentation Ferrule Fittings
- SMO254 Instrumentation Ferrule Fittings